Maintenance method for improving the effect of the use of the heat-insulating film
[China Glass Net] The role of car insulation film and the importance to car owners are self-evident. However, most car owners do not know much about the daily maintenance of car insulation film. Youma reminds the car owners that the car insulation film is also the same as the car, you must pay attention to daily maintenance, if properly maintained, it will help to extend the life of the car film and improve its use.
Step / method
1: In order to ensure that the car insulation film and the glass are completely adhered after the film is applied, the car film cannot be cleaned and the defogging line switch is turned on within one week. Try not to let the sun directly expose the glass, which will cause the result of foaming. The air conditioner inside the car should be turned on to allow the air to circulate inside and outside, and the natural resilience of the car film itself is formed to ensure the complete bonding of the rubber and the glass after the car film is installed. In order to form a safety explosion-proof effect 2: After the film is applied, a small amount of moisture will inevitably remain between the car insulation film and the glass, which may cause small bubbles or slight wave marks, causing blurred vision, which is normal. After sun exposure, it will disappear naturally after 4 to 10 weeks. If there is still a clear phenomenon after a period of time, be careful not to deal with it yourself, you should look for a professional technician.
3: When cleaning the glass, disable the acid-alkaline solvent cleaning, and try not to let the oily oil of the leather oil adhere to the automobile film. The cleaning method can be clean water or non-acid-alkaline cleaning liquid. Most glass cleaners are good for cleaning automotive films. The more suitable cleaning solution for automotive films is water and household cleaning products diluted in a ratio of 10 to 1.
4: The surface hardening of automotive films is limited. To avoid scratching the car's film, do not use any hard-cleaning products such as brushes and sandpaper. It is correct to clean the surface of the car membrane with a soft cloth or sponge. Clean the fabric outside the body, and do not use it to wipe the car film. Because the fabric used outside the car body is easy to carry fine sand, it is also one of the factors that cause the car film to scratch.
Lcd Display,Lcd Display Screen,0.96 Inch Tft Lcd,Lcd Display Led Backlight
Shenzhen Yetai Optoelectronics Technology Co.,Ltd. , https://www.yetailcd.com