How much do you know about the safe operation of glass washers?
[China Glass Net] 1. Before cleaning the glass, clean the water in the water tank of the washing machine and the dirt on the filter net, and add tap water. If the coated glass is cleaned, it should be replaced with pure deionized water.
2. Check if the air path is unobstructed. Turn on the power switch to adjust the thickness of the cleaning machine to the thickness of the glass to be cleaned.
3. Turn on the water pump power supply and check whether the water spray pipes are unblocked. If it does not work, clear the water in time.
4. Before washing the glass, check whether the glass to be cleaned is matched with the shelf. If the specification exceeds 3m in height and exceeds 2m, the large L frame should be used. If the specification width exceeds 0.5m, two layers are not allowed to be placed to prevent a safety accident.
5. When cleaning the glass on the 300m×300m size, the upper stage should be placed at a falling angle to prevent the glass from being under the air knife, or the brush should stop and stop, and the glass will be damaged. Below this specification, the film is not allowed. Wash the machine.
6. When placing the film, it should be noted that the position of the glass should not exceed the two end faces of the rubber wheel.
7. The person who cleans the film should carefully check the quality of the glass under the fluorescent lamp, and clean it. If there is any unqualified glass, pick it out in time and tell the class monitor to prevent mass quality accidents.
8. Glass with a slightly smaller size should be placed in the middle of the shelf. The glass with neat and tidy specifications should be kept in one end. The hollow glass should be placed in order. If the laminated glass is to be paired, the next piece should be paired.
9. When cleaning the coated glass, the film should face upwards, and the hard brush should be lifted by pneumatic. The lower part wears clean line gloves. When the lower frame is removed, the first film should be outward, and the last piece should be inward, two pieces. The glass room should be 100% isolated with PE film.
10. When cleaning the glass, it is necessary to continuously observe whether the water tank is short of water and replenish it in time.
11. The cleaned glass will be transferred to the next process in time to keep the site clean and tidy.
Spun Rayon Printed Fabric,Printed Spun Rayon Woven Fabric,Rayon Spandex Knitted,Spun Rayon Jersey Fabric
Shaoxing Shangda Textile Co., Ltd , https://www.shangdatex.com