4 tips for choosing a car glass film
[China Glass Network] How to choose auto glass film? Teach you four tricks, which are to see, smell, touch, and rub. The following will explain this in detail. Interested to learn to learn!
Look: the high definition is good film, the inferior film looks like a misty feeling.
Smell: After tearing off the protective layer, the inferior film smells a pungent smell, while the high-grade film uses environmentally-friendly glue, which has basically no taste or a hint of glue.
Touch: The high-grade film feels thick and smooth, and the inferior film is very soft and thin, lacking sufficient toughness and easy to wrinkle.
Wipe: You can wipe the surface of the film with a little alcohol or gasoline. Inferior film is easy to fade, and high-grade film is not easy to fade.
Understand these four tricks, then how should the owner choose the right glass film for the car? Below, the road guide Xiaobian will introduce you:
Front gear: The light transmittance of the front gear is generally above 75%, which ensures the clarity during driving and ensures driving safety. The higher the light transmittance, the more transparent the film is, but at the same time the thermal barrier properties and the UV barrier properties are reduced.
Side rear gear: There are many combinations of side rear window film.
1. For those who pay attention to privacy, you can choose a model with low light transmittance. The lower transmittance of the market is 5%, and you can't see the inside even on the window.
2. If you want to improve the thermal insulation performance, you can choose the model with high infrared blocking rate and high total heat insulation rate. The general insulation rate in the market can reach 60-70%, but it should be reminded that the car glass film with good heat insulation rate can not completely reduce the temperature rise inside the car, but can only alleviate or slow down the temperature rise.
3. If you want to improve safety, you can choose a high-priced explosion-proof membrane. This film can effectively prevent broken glass from hurting people when the glass is broken.
4. Of course, you can also choose to use the model of the front diaphragm to attach the side rear gear, which can not only affect the heat insulation and light blocking, but also does not affect the lighting of the interior space.
Diagonal Spandex Fabric,Cotton Spandex Fabric,Cotton Satin Drill Fabric,Elastic Thin Oblique Fabric
SHAOXING HENGHAI TEXTILE CO.LTD. , https://www.henghaitextile.com