Glass partition "clean" and "do not do" cleaning rules
Regular cleaning of the glass partition not only keeps the overall environment clean, but also extends the life of the glass partition, which of course is based on the correct cleaning method. We have been in the glass partition for 12 years, combined with practical experience, summed up the rules of glass partition "do" and "do not do".
What to do
When the glass partition is attached to dirt or residue, it is suitable to clean the glass;
Be especially careful when cleaning coated glass partitions;
Avoid cleaning colored glass and coated glass when exposed to direct sunlight;
When cleaning, it should be cleaned from the upper layer to the lower layer;
Soak the surface of the glass with water and cleaning solution to decompose the dirt;
Use a mild, abrasive-free commercial glass cleaning solution;
Use a rubber wiper to scrape off all cleaning fluid;
Dry the cleaning solution remaining in the gasket, sealant and aluminum frame;
Clean a small piece of glass and check if the method will cause damage to the glass;
Beware of other workers contacting the glass with other materials;
Take care to prevent damage to the glass;
It is recommended to read the entire maintenance method of the high compartment system before cleaning.
Things that should not be done
Do not use a knife to scrape any size and type of glass during the cleaning process;
Do not allow dirt and residues to remain on the glass surface for too long;
Do not clean the glass before confirming that the coating is bare;
Do not clean the painted glass or coated glass partition in direct sunlight;
Do not allow water or cleaning fluid to remain on the glass partition surface and the partition hardware;
Do not use abrasive cleaners or cleaning materials;
Do not allow the metal parts of the cleaning equipment to come into contact with the glass;
Do not allow other particles to be placed between the cleaning tool and the glass;
Do not use sharp, thin tools or materials for glass partitions;
Do not allow other substances that splash on the glass partition surface to dry out.
Hard work is worth encouraging and worthy of advocacy, but if there is no correct way, we may damage our glass partition. This is not good. Since we are hardworking people, read the words "Do it" and "No. This can be used to effectively clean the glass partition.
Suzhou Makeit Technology Co., Ltd , https://www.psffiber.com